Marmitek PROGUARD 800 User Manual page 32

Global Chime
HA Units
Home Automation
Instant Arm
Keyfob
Limited Code
Log
Master Code
Medical
Emergency
Message Center
Non-Controlled
Code
One-Key Arming
Panic Alarm
Part Arming
Perimeter Arming
Ready
Restore
-32-
G
A feature that enables/disables the Chime feature for the entire
system – see Chime.
H
Home Automation Units (abbr.). The lights and appliances in the
home that are controlled by the optional Home Automation feature.
An optional feature that enables the user to control electrical
appliances and lights via the control panel.
An arming method that cancels the entry delay after the system has
been Part or Perimeter armed.
K
Handheld wireless transmitters used to remotely control the system.
L
A user code that automatically expires 24 hours after it is
programmed.
See Event Log
M
The only user code with the ability to program other user codes. The
Master code also has exclusive access to specific system functions.
A type of alarm that informs the monitoring service that the user is in
need of medical assistance.
An optional feature that enables users to record messages to be
played back by other users.
N
A user code that does not cause the system to notify the monitoring
service when used to arm or disarm. The system only reports if the
code is used to disarm after an alarm.
O
Arming the system without the need for a valid user code.
P
A user initiated event that alerts the monitoring service in the event
of an emergency.
An arming method that is designed to activate a certain section of
the premises.
An arming method that is designed to activate the sensors protecting
the doors and windows while enabling residents to move freely on
the premises.
R
The state in which all zones are closed and the system is ready to be
armed.
The restoral of a trouble condition to its normal state. For example, if
AC power is reconnected, an AC Loss Restore event code is sent to
the monitoring station.
I
© MARMITEK