Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Peak Scientific Infinity 1030 Series
Summary of Contents for Peak Scientific Infinity 1030 Series
- Page 1 2024 Rev 10 - 11/04/2024...
- Page 2 Warranty Entitlement Supported Maintenance Guide Service Parts List...
- Page 3 SMG Guide Added Cleo Denholm 24/06/2024...
- Page 15 Introduction The following is a guide for maintenance of the Infinity 103x Nitrogen Generator as provided for by the Peak Service Plan. This procedure is to be performed on an annual basis. 1. Check that the LC/MS is not in use and that it is OK to disconnect the Gas Supply. Check the Gas Demand is turned OFF.
- Page 16 6. Unscrew the top and bottom covers from the breathing air filter. 7. Replace the Breathing Air Filter Elements and re-assemble breathing air filter. 8. Carefully open the Air Supply Valve. 9. Re-tighten the Nitrogen Outlet Lines and re-fit the Front Panel. 10.
- Page 17 Service Parts List Part Number Description Quantity 3302277 (00-0039*) RAC Filter Element 3302280 (00-0045*) Coalescing Element for BA Filter 3302281 (00-0046*) Active Carbon Element for BA Filter Element part numbers with (*) are obsolete, the 330XXXX part number should be ordered. Page 17...
- Page 18 Page 18...
- Page 19 Page 19...
- Page 20 2024...
Need help?
Do you have a question about the Infinity 1030 Series and is the answer not in the manual?
Questions and answers