Page 1
BLACK EDITION BLACK EDITION INSTALLATION MANUAL INSTALLATION MANUAL INSETS - 16" & 22" DOWNLOAD THE NEW E-SMART PLUS APP FROM THE APPLE APP STORE OR GOOGLE PLAY EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 INSETS B.E. ISS. 3...
EU DIRECTIVES All Evonic Fires products meet the requirements of the EC Directives. All Evonic Fires products meet the requirements of the EC Directives. These directives have been met by compliance with the following standards: These directives have been met by compliance with the following standards: EU 2011-65/EU 2015/863 Restriction of Hazardous Substances.
IMPORTANT INFORMATION AND HEALTH & SAFETY When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • Read all of the instructions carefully before using the appliance, only use this appliance as described in this manual.
CHECKS BEFORE INSTALLATION - ALL MODELS INSTALLATION DO’S AND DONT’S Before installing the appliance please read and take into account the following important requirements; • Consult a qualified professional to check the structure of the installation site. • If installing into an existing chimney, make sure to adequately block off the flue. •...
Page 6
INSET INSTALLATION - ALL MODELS All our inset models are designed to be fitted into a standard 16” wide x 22” high opening. Before starting the installation check the dimensions of both the appliance and your opening to ensure that they align well.
INSET INSTALLATION - SPACER REMOVAL Some of our inset models come with a spacer attached to allow installation into shallow recesses. If you are looking to achieve a flush installation, you will need to remove the spacer. To remove the spacer, you will need to undo the 6 screws that keep it in place.
FRONT GLASS REMOVAL - APPLICABLE MODELS Unscrew the two screws, and remove the bottom glass retainer from the appliance. The glass can now be removed from the appliance. To replace the glass, follow the steps in reverse. EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 INSETS B.E.
FITTING THE FASCIA MAGNETS The following fascias are attached with magnets; Colorado / Kepler 22 / Abberley / Stanford / Argenta SCREWED The Brooklyn and Detroit fascia are attached using screws. There are 4 screw holes located in the outside plaster kit which line up with 4 holes in the rear of both the Brooklyn and Detroit fascias. Offer up the fascia, and secure in place by screwing the fascia to the fire.
Page 10
FITTING THE FASCIA SLOTTED The Strellar cast fascia is secured to the front of the appliance with two top mounted clips and a mounting bracket. Line up the two clips with the top of the mounting bracket and slot them down into the bracket. The cast frame can now be screwed to the appliance using the 2x screws supplied.
OPERATION There are two ways to control all the features of your Evonic appliance - remote or App control. APP CONTROL REMOTE Our remote handset comes automatically paired and ready to operate straight out of the box. If you choose to control your appliance via the E-smart Cloud App your internet router and smart device should meet the following minimum requirements - Wi-Fi Router •...
REMOTE CONTROL 1. Remote Control/Handset Pairing Process: After turning on the fireplace with the rocker switch, there is a 60-second pairing window. This window begins after a beep, which occurs 15-20 seconds after the fireplace is switched on. After the first beep, press the ‘Heater ON’ button for 5 seconds until you hear a second beep. The pairing is now complete. Change Log Colour Effect Fireplace ON/OFF Log Colour Brightness Down...
APP SETUP - CREATE YOUR ACCOUNT Navigate to the Google Play Store or Apple App Store on your device. In the search bar, type E-Smart plus and download the application to your device. Navigate to the E-Smart Plus App on your device and open it. EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS.
Page 15
APP SETUP - ACCOUNT REGISTRATION Launch the e-smart plus app and this screen will appear. You need to create an account before you begin to link your fireplace. Press the ‘Sign Up’ button to continue. Enter your email address and create a password. Click ‘Agree to Privacy Policy’...
Page 16
APP SETUP - CONNECT YOUR FIREPLACE Ensure your fire is ON and your devices bluetooth is turned ON. Press the ‘Add New Fireplace’ button. Your device will now look for your fireplace using Bluetooth. Once it has been found, a green tick will be displayed. The next step is to connect to your router.
Page 17
Once you have selected your network, enter the WiFi password. The connection process will now begin and you will see this screen. Please note: This process may take 30-60 seconds. During the connection, your fireplace will turn OFF, then back When this process is finalising, you will see this screen.
USING THE E-SMART APP WiFi signal strength Turn fireplace ON/OFF Timer settings Fire settings Turn fireplace heater ON/OFF SCREEN NAVIGATION On the home page of the E-smart Cloud App you can see the name of your fireplace, the chosen temperature, and the actual temperature. On the right side you can turn the lights in the fireplace on and off, and also turn the heater on and off.
HEATER OVERVIEW Back to homepage Increase Temperature Target Temperature Decrease Temperature Turn fireplace ON/OFF Turn fireplace heater ON/OFF Go to Timer Go to Theme settings settings SCREEN NAVIGATION The Heater overview screen allows you to access all the key features of your fireplace. From this page you can turn your heater and fireplace ON/OFF and control temperature settings.
THEME OVERVIEW Back to homepage Choose flame style Adjust elements Choose log light style Adjust brightness Choose fuelbed style Adjust elements Go to Heater settings Go to Timer settings SCREEN NAVIGATION The theme overview page is where you can control all of the color options your fireplace has. From here, you can adjust Flame, Log &...
TIMER OVERVIEW Fire timer Heater timer Set desired time Set desired Save to add Go to Heater timer settings Go to Theme settings SCREEN NAVIGATION To add a new timer, start by pressing the icon To set up a timer, first select fire or heater. Under time, choose your desired start and end time using the 24-hour time format.
ACCOUNT SETTINGS To access the account settings in the e-smart + App, press the settings icon in the top right corner of the App. The settings panel will then be shown, where you can update your email, add your phone number for backup recovery, select a language and share access to your fireplace.
PROBLEMS CONNECTING If you are having problems connecting your fireplace with your device and router please try the following steps to fix the issue. • Switch fireplace OFF • Switch wi-fi router OFF • Switch fireplace back ON (Keeping router OFF) •...
Single press Search and type in evonicfires. Single press Search and type in evonicfires. Now on the Evonicfires Halo skill page you can Now on the Evonicfires Halo skill page you can Select the Evonicfires Halo skill icon to open.
Page 25
CONTINUED... Enter the log in details that you previously Enter the log in details that you previously After a few moments your account will be After a few moments your account will be entered in the app set up process, and single entered in the app set up process, and single linked, once this is done you can single press linked, once this is done you can single press...
CONNECTING TO GOOGLE HOME Once your fire is installed, and switched on, Once your fire is installed, and switched on, Single press Set up Device on the pop up list. Single press Set up Device on the pop up list. download and open the Google Home app.
Page 27
CONTINUED... Type in Evonic Fires, single press search and Type in Evonic Fires, single press search and Once in the Evoflame log in page, enter the Once in the Evoflame log in page, enter the then select the Evonic Fires E-Smart icon. then select the Evonic Fires E-Smart icon.
COMMANDS FOR AMAZON ALEXA When using Amazon Alexa or to control your appliance settings remember to substitute the words ‘the fire’ for whatever you have named your appliance. TURNING THE APPLIANCE ON AND OFF “Alexa, turn fire on.” / “Alexa, turn the fire off.” TURNING THE HEATER ON AND OFF “Alexa, set fire heater to auto.”...
E-SMART CLOUD APP LED CONNECTION Once the LED strip is plugged into the mains and In Settings go to Other Options. turned on. Go to the E-Smart app, then select Settings on your Home Page. Click on Search Mood Light, and wait for the app to connect to the LED strip.
TROUBLESHOOTING GUIDE FAULT POSSIBLE CAUSE SOLUTION Power lead has become Ensure the power lead has been disconnected. adequately plugged in. No power to appliance ON/OFF switch not turned to the Double check the position of the ON/OFF ON position. switch. Check fuse box.
Page 31
FAULT POSSIBLE CAUSE SOLUTION Ensure fan has been attached to Fan unbalanced. housing correctly. Noisy heater Fan catching on housing while Adjust fan to prevent catching on the turning. case. Tighten fan cradle or screws holding fan Fan has come loose from cradle. onto cradle.
To receive your Extended Warranty your Evonic Fires product must have been purchased from an authorised stockist within our Retailer Network and your warranty registered with Evonic Fires through the online form - evonicfires.co.uk/register-your-product. The commencement date for the warranty period is the date of purchase.
Page 33
WARRANTY EXCLUSIONS AND LIMITATIONS Repaired or replaced products are covered only for the remainder of the original warranty period. In the event of a claim being made, this must be reported to your retailer or CK Fires Ltd within 14 days of the fault occurring/being noticed.
Need help?
Do you have a question about the BLACK C1 and is the answer not in the manual?
Questions and answers