CONTENTS EU Directives and UKCA Standards..............3 Important Information and Health & Safety............4 Components for Suites..................5 Installation......................7 Model Dimensions..................8 Installation (Wall Mounted Suites)............... 10 Installation (Floor-based Suites)..............15 Installation (Floor-based Suites)..............15 Log Layouts....................17 Front & Side Glass Installation................19 Front &...
EU DIRECTIVES All Evonic Fires products meet the requirements of the EC Directives. All Evonic Fires products meet the requirements of the EC Directives. These directives have been met by compliance with the following standards: These directives have been met by compliance with the following standards: EU 2011-65/EU 2015/863 Restriction of Hazardous Substances.
IMPORTANT INFORMATION AND HEALTH & SAFETY When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • Read all of the instructions carefully before using the appliance, only use this appliance as described in this manual.
Page 6
WHAT IS E-SMART? E-Smart is a range of fires developed by Evonic Fires which allows you to operate your fire using either the E-Smart Cloud app on a smart phone or any internet connected device. This enables you to change the flame effect, adjust the speed or brightness of the flame effect, operate the heater, and change the temperature all through the app.
MODEL DIMENSIONS The model shown in these drawings is a Gilmour 7, however the same processes apply to all Suites. Scan the QR code for more detailed specification drawings. - Total width - Opening height - Total depth - Height - Height with riser EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1 EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1...
Page 11
INSTALLATION INSTALLATION REQUIREMENTS Before installing the appliance please read and take into account the following important requirements; • The appliance must never be installed in front of an electrical socket. • The appliance must not be installed anywhere that it may come into contact with water, i.e.
Page 13
Determine the finished height and position that you want the appliance to be located. Then secure the wall bracket to the wall in the position you need using the wall plugs and screws provided. If you’re not securing the appliance to a masonry wall you will need to use the appropriate fixings.
Page 14
You can now hang the appliance on the wall by slotting the tabs of the wall bracket into the slots on the back of the appliance. Connect the appliance to the mains power supply and it is ready to use. EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1 EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1 SUITES 180 MANUAL ISS.
Page 16
INSTALLATION REQUIREMENTS Before positioning the appliance please read and take into account the following important requirements; • The appliance must not be located anywhere that it may come into contact with water, i.e. a bathroom. • This appliance is only suitable for indoor use, do not use outdoors. •...
LOG LAYOUTS LOG LAYOUTS When you have your appliance installed you can set up your log set/s. Lay your Vermiculite and Glass Stones on the fuel bed first, then continue with laying out your logs. There is no right or wrong way to arrange your logs. The following images are an example of how you could lay them out.
FRONT AND SIDE GLASS FRONT AND SIDE GLASS INSTALLATION INSTALLATION SUITES 180 MANUAL ISS. 1 SUITES 180 MANUAL ISS. 1 EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1 EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1...
Page 20
Unscrew and remove the top and bottom glass retainer panels. The side glass can now be slid into the appliance. EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1 EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1 SUITES 180 MANUAL ISS. 1 SUITES 180 MANUAL ISS.
Page 21
Apply the Suction Lifter to the glass and apply the glass to the bottom edge first, then pivot into the appliance. Warning The Suction Lifter is provided to assist in moving the glass NEVER as the sole support of the glass. Always support the glass throughout the entire process until the glass is fully fitted.
Page 23
Evoflame Only - LED Strip Replacement Scan the QR code to be taken to a video in our maintenance series. Please note; this video shows an old method of removing the front glass panel. Refer to page 34 of this instruction manual for the new method.
Page 24
To receive your Extended Warranty your Evonic Fires product must have been purchased from an authorised stockist within our Retailer Network and your warranty registered with Evonic Fires through the online form - evonicfires.co.uk/register-your-product. The commencement date for the warranty period is the date of purchase.
Page 25
The Evonic Fires Extended Warranty does not affect your statutory rights. CK Fires Ltd / Evonic Fires 1, Evonic House, Clifford Park, Clifford Lane, Stratford-on-Avon, CV37 8HW Tel: +44 (0)1789 263868 Fax: +44 (0)1789 293080 Email: sales@evonicfires.co.uk www.evonicfires.co.uk Follow us on: Instagram | Facebook | Twitter | LinkedIn @evonicfires SUITES 180 MANUAL ISS.
Need help?
Do you have a question about the E-Smart Canto 200 and is the answer not in the manual?
Questions and answers