H3C S5500-28C-EI Installation Manual page 82

Installation Manual
H3C S5500-EI Series Ethernet Switches
Figure 5-4 Reconnect the HyperTerminal
Note:
The new baud rate takes effect only after you disconnect and reconnect the terminal
emulation program.
6) Press Enter to start downloading the program. The system displays the following
information:
Now please start transfer file with XMODEM protocol.
If you want to exit, Press <Ctrl+X>.
Loading ...CCCCCCCCCC
7) Select Transfer > Send File in the HyperTerminal, and in the following popup
dialog box click Browse..., select the software you need to download, and set the
protocol to XModem.
Figure 5-5 Send file dialog box
Chapter 5 Boot ROM and Host Software Loading
5-7