H3C S5500-28C-EI Installation Manual page 74

Installation Manual
H3C S5500-EI Series Ethernet Switches
Starting......
Press Ctrl-B to enter Boot Menu... 0
In normal startup mode, the waiting time here is five seconds. If you press Ctrl + B
within five seconds, the Boot Menu is displayed. If you press Ctrl + B within five
seconds, the Boot Menu is displayed: If you perform no operation or press a key other
than Ctrl + B within five seconds, the system begins to automatically start up and the
following information is displayed:
Auto-booting...
Decompress Image..........................................................
..........................................................................
..........................................................................
..........................................................................
..........................................................................
..........................................................................
...OK!
Starting at 0x80100000...
***********************************************************
*
* H3C S5500-28F-EI BOOTROM, Version 205
*
***********************************************************
Copyright (c) 2004-2007 Hangzhou H3C Tech. Co., Ltd.
Creation date : May 28 2007, 15:36:08
CPU Clock Speed : 533MHz
BUS Clock Speed : 133MHz
Memory Size : 256MB
Mac Address : 00e0fc005502
Initialize:
LSP2LTSUA..................................OK!
SDRAM fast selftest........................OK!
Flash fast selftest........................OK!
CPLD selftest..............................OK!
Switch chip selftest.......................OK!
PHY selftest...............................OK!
Subslot 1 (LSP1XP2P) selftest..............OK!
Subslot 2 (LSP1XP2P) selftest..............OK!
4-9
Chapter 4 Initial Power-On
*
*
*