H3C S5500-28C-EI Installation Manual page 71

Installation Manual
H3C S5500-EI Series Ethernet Switches
Starting......
Press Ctrl-B to enter Boot Menu... 0
The last line asks whether you want to enter the Boot Menu. The system waits two
seconds for your response.
Note:
The system has two startup modes: normal startup and fast startup. The normal
startup mode takes a little longer time than the fast startup mode because of more
self-test operations.
By default, the system starts up in fast mode and the waiting time here is two
seconds. If you set the startup mode to normal, the waiting time is five seconds. For
the setting of the startup mode, refer to the next section.
If you press Ctrl + B within two seconds, the Boot Menu is displayed:
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
***********************************************************
*
* H3C S5500-28F-EI BOOTROM, Version 205
*
***********************************************************
Copyright (c) 2004-2007 Hangzhou H3C Tech. Co., Ltd.
Creation date
CPU Clock Speed : 533MHz
BUS Clock Speed : 133MHz
Memory Size
Mac Address
BOOT MENU
: May 28 2007, 15:36:08
: 256MB
: 00e0fc005502
4-6
Chapter 4 Initial Power-On
*
*
*