H3C S5500-28C-EI Installation Manual page 72

Installation Manual
H3C S5500-EI Series Ethernet Switches
Table 4-1 describes the fields above.
Table 4-1 Description on the fields
BOOT MENU
Download application file to flash
Select application file to boot
Display all files in flash
Delete file from flash
Modify bootrom password
Enter bootrom upgrade menu
Skip current configuration file
Set bootrom password recovery
Set switch startup mode
Reboot
Enter your choice(0-9):
If you perform no operation or press a key other than Ctrl + B within two seconds,
once the remaining waiting time becomes zero, the system begins to automatically
start up and the following information is displayed:
Auto-booting...
Decompress Image...................................................
...................................................................
...................................................................
...................................................................
...................................................................
...............................................OK!
Starting at 0x80100000...
User interface aux0 is available.
Press ENTER to get started.
Field
4-7
Chapter 4 Initial Power-On
Description
Boot menu
Download the application files to the flash
Select application files for switch booting
Display all files in the flash
Delete files from the flash
Modify the password of Boot ROM
Enter BootROM upgrade menu
Skip current configuration files
Restore the Boot ROM password
Set the startup mode of the switch
Reboot the switch
Select your choice 0 to 9