H3C S5500-28C-EI Installation Manual page 75

Installation Manual
H3C S5500-EI Series Ethernet Switches
User interface aux0 is available.
Press ENTER to get started.
The appearance of "Press ENTER to get started" indicates that the automatic startup of
the switch is completed.
Press Enter. The following prompt is displayed:
<H3C>
You can configure the switch now.
Note:
The H3C Series switches provide abundant command views. For detailed descriptions
about the configuration commands and CLI, refer to H3C S5500-EI Series Ethernet
Switches Operation Manual and H3C S5500-EI Series Ethernet Switches Command
Manual.
Please check leds....................FINISHED!
4-10
Chapter 4 Initial Power-On