Boot Menu - 3Com LS8M1P12TEH Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches
Note:
You can follow the same procedure to load a Boot ROM and host software, except that
in a Boot ROM loading process you need to press Ctrl + U and Enter and will view
different prompt information after entering the Boot menu. All loading procedures
described in this chapter focus on how to load a Boot ROM.

7.2.1 BOOT Menu

Upon power-on, the switch will run the Boot ROM program and the terminal will display
the following information:
Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd.
Creation date
CPU type
CPU Clock Speed : 300Mhz
BUS Clock Speed : 33Mhz
BOOT_FLASH type : M29W040B
Flash Size
Memory Size
S7506 main board self testing................................
SDRAM Data lines Selftest.................................OK!
SDRAM Address lines Selftest..............................OK!
SDRAM fast selftest.......................................OK!
Please check LEDs.....................LEDs selftest finished!
CPLD selftest.............................................OK!
FPGA selftest.............................................OK!
The switch Mac address is .....................0000.0309.0004
Note:
The above information may vary slightly with the models of the S7500 series.
Press Ctrl+B to enter Boot Menu... 5
******************************************
*
* H3C S7506 BOOTROM, Version 530
*
******************************************
: Apr 20 2007, 20:08:58
: MPC8245
: 32MB
: 256MB
7-2
Chapter 7 Software Maintenance
*
*
*