Installation Manual
H3C S7500 Series Ethernet Switches
Figure 7-2 Console port configuration dialog box
6)
Click the Disconnect icon to disconnect the HyperTerminal from the switch and
then click the Connect icon to re-establish a connection using the new baud rate
setting.
Note:
After changing the baud rate, you need to disconnect and reconnect the terminal
emulation program to validate the new setting.
7)
Press Enter to start program downloading. The terminal displays the following
information:
Now please start transfer file with XMODEM protocol.
If you want to exit, Press <Ctrl+X>
Downloading ... CCCCC
8)
Select Transfer>Send File in the HyperTerminal window. In the popup dialog box
shown in Figure 7-3, click Browse..., select the software you need to download,
and set the protocol to XModem.
Chapter 7 Software Maintenance
7-6