Installation Manual
H3C S7500 Series Ethernet Switches
(1) Cabinet retaining nut
(3) Anchor strip retaining nut
Figure A-33 Lock cabinet feet
A.3.9 Combining Cabinets
If two (and more than two) cabinets are used, follow these steps to connect them
together.
1)
Remove the cabinet covers as shown in Figure A-34.
2)
Rotate the combining brackets on top of the cabinets by 180 degrees, tighten them,
and connect the cabinets with flat washers, spring washers, bolts and nuts, as
shown in Figure A-35.
3)
Figure A-34 illustrates the original position of the combining brackets and Figure
A-35 illustrates the position after they are rotated.
Appendix A B68-22 Cabinet Installation
(2) Cabinet foot
(4) Downside of the cabinet
A-30