Configuring The Boot Loader Using The Boot Menu - 3Com Switch 4210 Series Getting Started

Configuring the Boot
Loader Using the Boot
Menu
Upgrading the Boot
ROM from the Boot
Menu using TFTP
Please input the file attribute (main/backup/none):none
done!
6 Repeat step 1 to step 5 for each of the remaining files (.app, .btm, and .def files).
Choose none when you have completed all downloads.
This section describes how to configure which .app file the Switch uses to boot
once the software is loaded from the Boot menu. It includes the following sections
Upgrading the Boot ROM from the Boot Menu using TFTP
■
Upgrading the Boot ROM from the Boot Menu using FTP
■
Upgrading the Boot ROM from the Boot Menu using XModem
■
Perform the following steps:
1 From the Boot menu, select option 2 to display the following:
Select application file to boot:
1. set application file to boot
2. set configuration files
3. set web files
0. return
Enter your choice (0-3):
2 Select option 2 to display a file list similar to the following:
Boot menu choice: 2
File Number File Size(bytes) File Name
====================================================
1(*) 4649088
Free Space: 10491904 bytes
The current application file is s3t03_01_00s56.app
(*)-with main attribute;(b)-with backup attribute
(*b)-with both main and backup attribute
Please input the file number to change:
An asterisk (*) indicates the current main boot file.
A similar screen will be displayed for the configuration files and the web files. In
each case, the file is given the attribute "main" or "backup"
To upgrade the Boot ROM firmware from the Boot menu using TFTP do the
following:
1 From the Boot menu, select option 6 to display the Boot ROM upgrade menu as
shown:
Bootrom update menu:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu

Configuring the Boot Loader Using the Boot Menu

s3t03_01_00s56.app
67