Restoring The Floor - 3Com LS8M1P12TEH Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches
until the requirement is satisfied. Figure A-17 shows how to mount a cabinet on the
slide rails on a rack
A.3.12 Restoring the Floor
Cut the antistatic floor around the cabinets and restore the floor. Figure A-38 shows
how to restore the floor and Figure A-39 shows what the site should look like after the
floor is restored.
Caution:
You may install the framework of the antistatic floor onto the side supports, as shown in
Figure A-38.
(1) Framework of the antistatic floor
Figure A-38 Restoring the antistatic floor
Appendix A B68-22 Cabinet Installation
(2) Side support
A-35