3Com LS8M1P12TEH Installation Manual page 215

Installation Manual
H3C S7500 Series Ethernet Switches
(1) Bolt M12×70
(5) Insulation pad of the anchor plate
(8) Nut for fastening the anchor plate
Figure B-16 Fix the anchor plate
3) Fix the nuts for fastening anchor plates.
Fix the nuts for fastening anchor plates, as shown in area B in Figure B-16.
4) Fix cabinet tops when combining cabinets.
If you need to combine two or more cabinets together, related connections need to be
performed. Combine the cabinets with connecting plates on the top of the cabinets.
Note:
If the side panels have been installed, remove the side panels as required before
combining the cabinets.
The connecting plates are installed on the top of the cabinets and delivered together
with the cabinets, as shown in Figure B-17.
(2) Spring washer 12
(6) Expansion tube
B-17
Appendix B N68 Cabinet Installation
(3) Big flat washer 12 (4) Insulation washer
(7) Expansion bolt
(9) Anchor plate