Local Loading Through Boot Menu - 3Com LSBM1SRP1M1 Installation Manual

Installation Manual
H3C S9500 Series Routing Switches
Loading using TFTP and through Ethernet port
Loading using FTP and through Ethernet port
2) Local or remote loading through CLI:
Loading using FTP
Loading using TFTP
Note:
When loading Boot ROM and host software, make sure that Boot ROM matches the
host software. You are recommended not to load Boot ROM frequently. You need to
load the correct Boot ROM only when the host software to be loaded does not
match the current Boot ROM.
You can load only Boot ROM and host software of SRPUs through the Boot menu.
To load Boot ROM of LPUs, use the CLI mode.

5.3.2 Local Loading through Boot Menu

Caution:
Never hot-plug the CF card after you enter the Boot ROM menu. After replacing the CF
card, you must reboot the SRPU. Otherwise, the CF card cannot work properly.
I. Boot menu
After powering on the Switch, run Boot ROM program first and the terminal will display
the following information:
ZBB_TEST
Starting...
Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
CPU type
CPU L2 Cache
CPU Clock Speed : 400MHz
*************************************************
*
* H3C S9500 Bootrom, Version 206
*
*************************************************
: MPC755
: 1024KB
5-14
Chapter 5 Switch Monitoring and Maintenance
*
*
*