Leveling Cabinets - 3Com LS8M1P12TEH Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches
(1) Flat washer 12
(4) M12 nut
(7) Left bracket
Figure A-31 Install the front and side supports
III. Fixing the front support and the side floor pallet fixing brackets
Adjust the front support and the side floor pallet fixing brackets vertically to have the
upper surface of the fixing brackets flush with the downside of the antistatic floor. Then
fasten the M12 × 35 bolts.
A.3.8 Leveling Cabinets
I. Positioning Cabinets
Lift the cabinets on the slide rails, and align centers of the cabinet feet with the centers
of the troughs on the slide rails vertically. Align all cabinets.
II. Leveling Cabinets
Unfasten the retaining nuts of the cabinets. Place two horizontal rulers perpendicular to
each other on the top of the cabinet to check that the cabinet is straight. Rotate the
screw bolts on the feet to adjust the height of the cabinets until they are flush. Figure
A-32 shows how to level the cabinets.
Appendix A B68-22 Cabinet Installation
(2) Spring washer 12
(5) Side support
(8) Floor pallet fixing bracket
A-28
(3) M12 × 35 bolt
(6) Right bracket
(9) Front support