Module Interface Optical Fiber; 8-Port 10Base-T/100Base-Tx Module; Module Panel And Leds - 3Com LS-S3610-52P-OVS Installation Manual

Installation Manual
H3C S3610 Series Ethernet Switches
Table 7-1 Meaning of LEDs on 8-port 100Base-FX single mode/multi-mode module
panel
LED
LINK
ACTIVE

7.1.2 Module Interface Optical Fiber

Interface attributes of 8-port 100Base-FX multi-mode/single mode module under the
working condition of 100Base-FX full-duplex.
8-port 100Base-FX multi-mode/single mode module works in 100 Mbps full-duplex
mode. The following table lists its interface attributes.
Table 7-2 Interface attributes of 8-port 100Base-FX multi-mode/single mode module
Attribute
Interface
connector
Number of
connectors
Interface
attribute
Medium and
maximum
transmission
distance

7.2 8-Port 10Base-T/100Base-TX Module

7.2.1 Module Panel and LEDs

The following figure shows the panel of 8-port 10Base-T/100Base-TX module:
Figure 7-2 Panel of 8-port 10Base-T/100Base-TX module
OFF means that the line is disconnected. ON means the line is
connected.
OFF means that no data is being transceived. Blinking means data is
being transceived.
8-port 100Base-FX single
mode module
LC
8
100 Mbps full-duplex
9/125 µm single mode optical
fiber
15 km (9.3 mi)
7-2
Chapter 7 Optional Interface Modules
State
Description
8-port 100Base-FX
multi-mode module
62.15/125 µm multi-mode
optical fiber
2 km