Installation Manual
H3C S3610 Series Ethernet Switches
Note:
For specifications of each SFP module, refer to H3C Low-End Series Ethernet
Switches Pluggable Module Manual.
The available SFP modules may change as time goes by. Contact the H3C
marketing or technical support personnel for the latest available SFP modules.
V. Console port
The S3610-52P provides an EIA/TIA-232-compliant console port. You can use this port
to configure the switch locally or remotely. See Table 1-6 for the attributes of the
console port.
1.5.2 Rear Panel
The S3610-52P has an AC-input power socket, a DC-input power socket, and a
grounding screw on its rear panel, as shown in Figure 1-8.
(1) AC-input power socket
Figure 1-8 Rear panel of the S3610-52P
1.5.3 Power Supply System
I. AC-input voltage range
Rated voltage range: 100 VAC to 240 VAC, 50 Hz or 60 Hz
Max voltage range: 90 VAC to 264 VAC, 50 Hz or 60 Hz
II. DC-input voltage range
Rated voltage range: –48 VDC to –60 VDC
Max voltage range: –36 VDC to –72 VDC
1.6 S3610-52M/S3610-52M-DC Ethernet Switch
1.6.1 Front Panel
I. Illustration
(1)
(1)
(2)
(2)
(2) DC-input power socket
1-21
Chapter 1 Product Overview
(3)
(3)
(3) Grounding screw