Table of Contents
Advertisement
Installation Manual
H3C S3610 Series Ethernet Switches
Step 6: Press <Enter> to start program loading. The system displays the following
information:
Now please start transfer file with XMODEM protocol.
If you want to exit, Press <Ctrl+X>.
Loading ...CCCCCCCCCC
Step 7: Select [Transfer/Send File] in the HyperTerminal's window, and in the popup
dialog box similar to the following figure click <Browse>, select the software you need
to download, and set the protocol to XMODEM.
Figure 5-4 Send File dialog box
Step 8: Click <Send>. The system displays the following interface.
Figure 5-5 Sending File interface
Step 9: After completing loading, the system displays the following information:
Loading ...CCCCCCCCCC done!
Chapter 5 Loading Boot ROM and Host Software
5-6
Advertisement
Table of Contents
