S3610-28Tp Ethernet Switch; Front Panel - 3Com LS-S3610-52P-OVS Installation Manual

Installation Manual
H3C S3610 Series Ethernet Switches

1.2 S3610-28TP Ethernet Switch

1.2.1 Front Panel

I. Illustration
On its front panel, the S3610-28TP provides 24 fixed 10Base-T/100Base-TX Ethernet
ports, two 1000 Mbps SFP ports, two 10/100/1000Base-T Ethernet ports and one
console port, as shown in Figure 1-1.
(1) 100 Mbps Ethernet port status LEDs
(3) 1000 Mbps Ethernet port status LEDs
(5) 7-segment numerical display
(7) Port mode switch LED
(9) DC-input power LED
Figure 1-1 Front panel of the S3610-28TP
II. LEDs
For your convenience to monitor the operation of the switch, the S3610-28TP provides
one power LED, one DC-input power LED, one port mode switch LED, one 7-segment
numerical display, 24 × 10/100 Mbps Ethernet port status LEDs, two 1000 Mbps SFP
port status LEDs and two 10/100/1000 Mbps Ethernet port status LEDs on its front
panel. Table 1-2 describes the meanings of these LEDs:
Table 1-2 LEDs on the front panel of the S3610-28TP
LED
Port mode switch
LED
Mark Status
Speed
Mode
Duplex
1-2
Chapter 1 Product Overview
(2) 1000 Mbps SFP port status LEDs
(4) Console port
(6) Port mode switch button
(8) Power LED
The port status LEDs are
Solid
showing their current port
green
speeds.
The port status LEDs are
Solid
showing their current duplex
yellow
modes.
Meaning