Warnings In Handling Batteries; Cautions For Storage - FUTABA RS301CR Instruction Manual

Command type servo for robot
Table of Contents

Advertisement

Do not turn the servo horn forcibly.
Otherwise, the servo will be damaged.
Do not leave the servo locked.
If the servo continues to be locked due to a strong external force, it may cause smoke,
fire or damage.

Warnings in Handling Batteries

Warning
Do not use any battery charger other than the specified charger.
Otherwise, the battery may be get damaged, fire, smoke or liquid leakage. Be sure to
use batteries recommended by Futaba.
Do not use battery packs connected in parallel.
Connecting battery packs in parallel may cause abnormal heat generation or
explosion due to the differences between charging voltages.
Do not disassemble or alter battery packs.
Otherwise, it may cause fire, explosion or liquid leakage. And please be aware that
such battery packs will be no longer guaranteed even if their warranties are not
expired.
Do not use batteries if any abnormal symptoms are seen.
If you find any abnormal symptoms such as cracks in coating film, abnormal heat
generation from batteries or deformation of batteries, never use the battery because
it may cause serious consequences.
Caution
Do not store the servos in the following conditions.
Places where the temperature is over 60℃ or below -20℃.
Places where the Sun directly shines over the servos.
Places where it is very high in humidity.
Places where there is a strong vibration.
Places where there is a lot of dust.
Places where static electricity tends to be induced.
Places where infants can reach.
◆ Storing the servos in the places shown above may cause deformation and failure of the servos,
or hazard.

Cautions for Storage

5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rs302cd

Table of Contents