1.For Safety; Warning Symbols; Cautions For Use - FUTABA RS301CR Instruction Manual

Command type servo for robot
Table of Contents

Advertisement

To use this product safely, please pay your full attention to the followings. Be sure to
read this instruction manual prior to using this product.
The warning symbols used in this text are defined as follows:
Indication
Danger
Warning
Caution
Symbols:
Caution
Do not disassemble or alter the servo.
Otherwise, it may cause breakage in the gear box, fire on the servo or explosion of
the battery.
Do not use any battery as a power supply other than the specified battery.
The product is designed to be operated by Futaba's 9.6V Ni-MH battery only. Do not
use any other batteries.
Do not touch the servo case during or some time after operating the servo.
Otherwise, you may get burned on the finger as the motor or electronic circuit in the
servo gets very hot.
Do not let the servo get covered with sandy dust or water.
Otherwise, the servo may stop moving or have a short circuit. The servo is not
designed to be waterproof or dust-proof.
Do not use this product for any application other than indoor hobby-robots.
Futaba is cleared of all responsibility to the results caused by the usage of this
product for any application other than indoor hobby-robots.
1.FOR SAFETY

Warning Symbols

Indicates a hazard that will cause severe personal injury, death, or
substantial property damage if the warning is ignored.
Indicates a hazard that can cause severe personal injury, death, or
substantial property damage if the warning is ignored.
Indicates a hazard that will or can cause minor personal injury, or
property damage if the warning is ignored.
; Prohibited

Cautions for Use

Meaning
; Mandatory
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rs302cd

Table of Contents