This functions resets the contents of the currently called model memory to the initial
value. However, it does not reset the lap time memory, HRS/PPM select, and LED
mode selection.
Calling the setup screen
1. Turn on the power switch
while pressing "SEL" key.
Model Reset
1 (Reset execution)
Press the (+) and (-) buttons simultaneously for about 1 second.
2 When ending adjustment, turn off the power switch once before use.
This function allows you to assign a three character name to each model memory.
(Number and alphabet can be used.)
Calling the setup screen
1. Turn on the power switch
while pressing "SEL" key.
Model Name
1 Move the cursor (blinking) to the column you want to change using the
(CH) button.
2 Change the character using the (+) or (-) button.
(Set the model name by repeating steps 1 and 2 above. )
3 When ending adjustment, turn off the power switch before use.
52
Model Reset / CLR
2. Next, use "SEL" key to select
the desired function screen.
Model Name / NAM
2. Next, use "SEL" key to select
the desired function screen.
Model name
Current model No.