Installation; Receiver And Servo Connections; Installation Safety Precautions - FUTABA 3GR-2.4GHZ Instruction Manual

Receiver and Servo Connections

When connecting and installing the receiver and servos, read the "Installation Safety
Precautions".
Installation For Electric Powered Models
Installation For Gas Powered Models

Installation Safety Precautions

Receiver Antenna Installation
Install the R603FF receiver on the car as follows:
Note: The operating range may become shorter, depending on
where the receiver and the antenna are mounted.
Warning
•Install the antenna in the higher place as shown in the figure.
•Keep the antenna as for away from the motor, ESC and other
noise sources as possible.
•Put the antenna in the antenna tube to protect it.
•Do not cut the antenna.
•Do not bend the coaxial cable. Doing so causes damage.

Installation

ESC
R603FF
R603FF
Antenna
tube
Antenna
Coaxial
cable
R603FF
21