FUTABA 3GR-2.4GHZ Instruction Manual page 24

3. Trims Initial Set-Up
- Steering trim (DT1) check
Steering trim
At initial set-up, steering trim is assigned to digital trim
position
DT1. Operate the DT1 lever and check if the steering
trim value on the screen changes. After checking the
trim, set the trim value to the center (0) position.
- Throttle trim (DT2) check
Throttle trim
At initial set-up, throttle trim is assigned to digital trim
position
DT2. Operate the DT2 lever and check if the throttle
trim value on the screen changes. After checking the
trim, set the trim value to the center (0) position.
DT2
DT1
25