Steering Exp / Throttle Exp - FUTABA 3GR-2.4GHZ Instruction Manual

This function is used to change the sensitivity of the steering servo around the neutral
position and makes throttle stick high side and brake side direction servo operation
quicker or milder. It has no effect on the maximum servo travel.
Racers Tip
When the setting is not determined, or the characteristics of the model are unknown,
start with 0%. (When EXP is set to 0%, servo movement is linear.)
Advice (Throttle EXP)
When the course conditions are good and there is no sense of torque at the power unit,
set each curve to the + side (quick side). When the road surface is slippery and the
drive wheels do not grip it, set each curve to the - minus (mild) side.
Calling the setup screen
(Initial screen)
Press "SEL" key to select the
desired function screen.
Steering EXP adjustment
(Preparation)
- Select setup item "EXP-ST" and make the following adjustments:
1
When you want to quicken steering operation, use the (+) button to adjust
the + side. When you want to make steering operation milder, use the (-)
button to adjust the - side.
2
When adjusting the EXP rates of another channel immediately after this,
see the adjustment method for that channel. When ending adjustment,
return to the initial screen by pressing the (SEL) button.
+1% +100%
+1% ~ +100% (quick)
34
Steering EXP, Throttle EXP / EXP
(Setup screen)
Setup item
EXP-ST: Steering EXP rate
EXP-FW : Forward side EXP rate
EXP-BK : Brake side EXP rate
(Quick)
Servo travel
0%
0% (normal)
Steering wheel travel
Press "CH" key to select the next set-
up screen.
Adjustment range
-100~0~+100%
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Return to the initial value by pressing
the (+) and (-) buttons simultaneously
(approx. 1 sec).
(Mild)
Servo travel
0%
0% (normal)
Steering wheel travel
-1% -100%
-1% ~ -100% (mild)