FUTABA 3GR-2.4GHZ Instruction Manual page 15

Digital Trim Operation
(Initial settings: DT1: Steering trim, DT2: Throttle trim, DT3=Steering D/R, DT4=Throttle ATL)
Push the lever to the left or right (up or down).
The current position is displayed on the LCD screen for about three seconds when
each digital trim is operated.
DT4
Trim Operation
With the digital trim feature, trim adjustments have no effect on the maximum servo
travel. This prevents the linkages from binding when adjustments are made.
Stick Lever Head Adjustment
The length of the lever head of the steering and throttle sticks can be adjusted.
Adjustment
1
Unlock lever head "A" by turning it counter-
clockwise.
2
Adjust the head to the length best for you,
then lock the heads by turning lever head
"A" clockwise and lever head "B" counter-
clockwise.
16
DT3
DT2
Steering D/R rate
DT1
- Each step is indicated by a tone.
- When the trim exceeds the maximum trim adjust-
ment range, the tone will change pitch and the lever
will not move any farther.
Throttle trim
Steering trim
position
position
ATL position
Lever head
"A"
Lever head
"B"