Servo Reverse - FUTABA 3GR-2.4GHZ Instruction Manual

This function reverses the direction of operation of the servos related to transmitter
steering, throttle, and channel 3 operation.
However, when the position set by trim or subtrim shifts from the center, the center
becomes the opposite side.
Calling the setup screen
(Initial screen)
Press "SEL" key to select the
desired function screen.
Servo Reverse Function Setting
(Preparation)
- Preselect setup channel "ST", "TH", or "3C".
1
(Servo reverse setting)
Use the (+) or (-) button to reverse the servo operation direction.
(Each channel can be set similarly.)
2
When ending adjustment, return to the initial screen by pressing the (SEL)
button.
Servo Reverse / REV
(Setup screen)
Setup Item
REV-ST : Steering
REV-TH : Throttle
REV-3C : Channel 3
Press "CH" key to select the next set-
up screen.
Servo direction
OFF: Normal side
ON: Reverse side
47