Channel-4 Servo Reversing (Rev-Ch4); Steering Exp (Exp-Ch1); Throttle Exp (Exp-Ch2) - FUTABA 3pv-2.4g Instruction Manual

Channel-4 Servo Reversing （ REV-CH4 ）
(This setting screen is displayed when 4WS mixing or Brake mixing is activated.)
This function reverses the rotation
direction of the channel-4 servo.
*CH4 can't be used in R203GF.
When the trim position deviates from the
center, the deviation will be on the opposite
side when the servo is reversed.
This function is used to change the
sensitivity of the steering servo around
the neutral position. It has no effect on
the maximum servo travel.
[ － ] Minus → Around the neutral
position is mild.
[ ＋ ] Plus → Around the neutral
position is quick.
Racers Tip
When the setting is not determined, or the characteristics of the model are unknown, start
with 0%. (When EXP is set to 0%, servo movement is linear.)
This function changes the sensitivity of
the throttle servo in the throttle trigger
forward side and brake side directions.
It has no effect on the servo maximum
travel.
－side
Mild
＋side
Quick
Back
Brake
Trigger
Racers Tip
When the track conditions are good and there is no sense of torque at the power unit, set the
EXP to the + (quick) side. When the track is slippery and the drive wheels lose their grip,
set the EXP to the - (mild) side.
Steering EXP （ EXP-CH1 ）
Throttle EXP （ EXP-CH2 ）
＋side
Quick
－side
Mild
Forward
Channel-4 Servo Reverse
NOR: Normal
REV: Reverse
Steering EXP
Throttle EXP
Forward
Adjust the EXP
while operating
the throttle trigger
(Forward side)
each way.
Brake
Direction change
+ -
and Press and hold
Reset
EXP rate change
Range: -100% ～ +100%
+ -
and Press and hold
Reset
EXP rate change
Range: -100% ～ +100%
(Brake side)
Range: -100% ～ +100%
+ -
and Press and hold
Reset
EXP rate change
21