FUTABA 10CAG Instruction Manual page 8

RECEIVER: R6014HS/R6008HS
• These models have two (2) operation modes as shown below.
Normal mode/High Speed mode
The "Normal mode" accepts any type of servos or the peripherals as the frame rate of the output is 14ms. The "High
Speed mode" only accept the digital servos for outputs from 1ch to 6ch, including BLS series, and most peripheral
equipments such as the gyros or brushless ESCs. The frame rate of the outputs is 7ms.
The outputs for other channels indicated below allow to use any type of servos as the frame rate of these outputs are still
14ms on the High Speed mode.
R6008HS - 7ch and 8ch
R6014HS - 7ch to 12ch, DG1, DG2
• Futaba FASST-2.4G R6014HS,R6014FS, R6008HS or R608FS receiver may be used with the 10CG at 2.4G-10ch mode.
Futaba FASST-2.4G R607FS, R617FS, R616FFM or R6004FF receiver may be used with the 10CG at 2.4G-7ch mode.
T10CG 2.4G system and receiver
compatibility
SERVOS
R6014HS
T10CG 2.4G System
Transmitter
R606FS
10ch mode —
7ch mode Okay
8
R6008HS
Receiver
R6004FF, R616FFM, R608FS, R6008HS,
R607FS, R617FS R6014FS, R6014HS
— Okay
Okay —