FUTABA 10CAG Instruction Manual page 6

To prevent possible damage to your radio gear, turn the power switches on and off in the proper sequence:
2. Turn on the transmitter power and allow your transmitter to reach its home screen.
4. Turn on your receiver power.
6. Start your engine.
7. Complete a full range check (see p. 22).
9. Turn off receiver power.
10. Turn off transmitter power.
in the case of electric-powered or gasoline-powered models, the engine may unexpectedly turn on and cause a severe
injury.
tip it over. If it is knocked over, the throttle stick may be accidentally moved, causing the engine to speed up.
Also, damage to your transmitter may occur.
In order to maintain complete control of your aircraft it is important that it remains visible at all times. Flying
behind large objects such as buildings, grain bins, etc. is not suggested. Doing so may result in the reduction of the
quality of the radio frequency link to the model.
transmission.
As with all radio frequency transmissions, the strongest area of signal transmission is from the sides of the
this situation, easily move the antenna to correct this situation.
Water or moisture may enter the transmitter through the antenna or stick openings and
Doing so may degrade the quality of the radio frequency
6