Table of Contents
Advertisement
Spanning Tree Protocol is a link management protocol for RCP bridges which provides path
redundancy while preventing loops in a network. STP allows only one active path at a time between
the RCP bridges but establish the redundant link as a backup if the initial link fails.
STP Forward Delay
STP Forward Delay is the time spent in detecting and learning network tree topology state before
entering the forward state. Default time value is 1 sec. Select Normal if you would like to modify the
parameter (4-30 seconds).
Link Aggregation
Link Aggregation combines two physical network links into a single logical link for increased
bandwidth. Besides, it provides load balancing.
Basic Wireless Settings
Open "Radio" in "Wireless" as below and select "WLAN 0" or "WLAN 1" to make basic wireless
configuration on radio card 1 and 2.
Mode
In a point to point environment where there are only two radios, Peer to Peer is recommended as it
works more efficiently.
Chapter 3 Basic Settings
Figure 23 Basic Wireless Settings
30
Advertisement
Table of Contents
