bouncepad Core Lounge Assembly Instructions

Core Lounge
Assembly Instructions
Tools Required:
Socket Driver
Sheet Code: BP-IM-091_REV0
Release Date: 22/08/2024
Copyright 2024 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
*Before attaching the
Mounting Plate, fully clean
the back of the tablet with
the provided wipe and allow
it to fully dry.
Landscape tablet orientation
For optimal adhesion, press firmly and leave for 72hrs in a 20°C
environment before use. Do not reposition. Do not use prior to the
72hrs.
Portrait tablet orientation
Remove the Mounting Plate adhesive
1
backing. Attach level & centrally to
the Tablet back as shown.
Ensure the Lounge Cone is orientated
4
correctly as shown, with the cable
exit at the top.
Tablet Mounting Fixings Kit
Plate
Shell
Lounge
Mounting
Reinforced Flat
Cable
In the Box
Attach the Reinforced Flat Cable to
2
the Tablet with the U-Bend Head.
Top
Case Washer
M4 Split Washer
M4x16mm
Buttonhead screw
T20 Pin Torx Driver Bit
Attach the Shell to the Lounge as
5
shown.
1x T20 Pin
Torx Driver Bit
4x M4x16mm
Buttonhead
Arm
4x M4 Split
Washer
1x Case
Washer
Fixings List
* Due to the modular nature of our product range you may receive additional fixings in the fixings kit
Tighten screw(s) using hand tools, using electric
3
6
2x 3mm x 6mm
Pan Head
4x M3x10mm
Countersunk
screw
1x Cable
Clamp
1x T10 Pin Torx
Allen Key
Maximum Mounting
surface thickness :
Metric Imperial
25 1"
mm
1x Cleaning
Wipe
tools may damage your Bouncepad.
2x 3mmx6mm Pan
Head Screws
Cable Clamp
T10 Pin Torx Allen
Key
Secure the Reinforced Flat Cable to
the Mounting Plate with the Cable
Clamp as shown.
Remove the Fixing Covers. Feed the
Reinforced Flat Cable through the
Shell & Lounge Cone as shown.
Screws
Screw