Advertisement
Quick Links
Self-Service Mount
Sheet Code:
BP-IM-075_REV3
Release Date:
22/06/2022
Copyright 2022 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Complete the steps for your chosen
1
Stand up until the point of attaching
the Case. Then turn to this Manual.
Remove the backing from Adhesive
4
Strips. With the cable resting in the
bend, centre your Payment Device and
firmly press down. Plug in the USB cable
1x Spacer
In the Box
Main Product
Manual
Remove the backing from the
2
Spacer. Align with the screw holes
on the Case and firmly stick down.
Adhesive Strip
Backing
Payment Device
5
Depending on the size of your tablet/case, note the mounting location.
1x Self-Service Mount
Backing
Spacer
Route the Payment Device Charger
3
Cable through the Self-Service
Mount.
10-11" Tablet (Maxi Case)
12" Tablet (Mega Case)
T20 torx
4x M4
allen key
buttonhead
screw (20mm)
Fixings List
* Due to the modular nature of
our product range you may receive
additional fixings in the fixings kit
Payment Device
Charger Cable
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for bouncepad Self-Service Mount
Summary of Contents for bouncepad Self-Service Mount
- Page 1 Self-Service Mount T20 torx 4x M4 allen key buttonhead screw (20mm) 1x Spacer 1x Self-Service Mount Sheet Code: BP-IM-075_REV3 Release Date: 22/06/2022 Copyright 2022 Spotspot Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this publication may be reproduced or transmitted in any...
- Page 2 M4 Machine Screw M4 Split Washer Tablet Charger Cable Case Washer Payment Device Charger Cable Attach the Case and Self-Service Feed your charge cables through the Return to the Main Product Manual Mount to the Mounting arm with the Mounting Arm. to complete the assembly.
Need help?
Do you have a question about the Self-Service Mount and is the answer not in the manual?
Questions and answers