Power; Energy Saver; Timeouts; Energy Saver Options - HP Point of Sale rp5000 Setup Manual

Computer Setup (Continued)
Heading

Power

✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
Computer Setup (F10) Utility Guide
Option

Energy Saver

Timeouts

Energy Saver Options

www.hp.com
Computer Setup (F10) Utility Guide
Description
Allows you to set the energy saver mode
(advanced, disable, or minimal).
✎
In the minimal energy saver mode setting,
the hard drive and system do not go into
energy saver mode, but the setting allows
you to press the power button to suspend
the system.
This option does not affect power
management for the ACPI-enabled
operating systems.
Allows you to disable or manually select
timeout values for the system and/or all
attached IDE hard drives.
✎
This option does not affect power
management for the ACPI-enabled
operating systems. This selection will only
appear when energy saver mode is set to
advanced.
Allows you to set:
• Power button configuration (on/off or
sleep/wake) under APM-enabled
operating systems.
• Power LED blink in suspend mode
(enable/disable).
✎
Energy Saver Options will appear only
if the energy saver mode is enabled.
This option does not apply under
ACPI-enabled operating systems.
13