Using Computer Setup Utilities - HP Point of Sale rp5000 Setup Manual

Using Computer Setup Utilities

✎
Ä
Computer Setup (F10) Utility Guide
To access the Computer Setup Utilities menu, complete the following
steps:
1. Turn on or restart the computer. If you are in Windows, click
Start > Shut Down > Restart the Computer.
F10
2. Press the key as soon as the computer begins to boot.
If you do not press the
Windows operating system begins, you must restart the computer
F10
again and press
3. Select your language from the list and press the
4. A choice of five headings appears in the Computer Setup Utilities
menu: File, Storage, Security, Power, and Advanced.
5. Use the arrow (left and right) keys to select the appropriate
heading. Use the arrow (up and down) keys to select the option
you want, then press the
Setup Utilities menu, press the
6. To apply and save changes, select File > Save Changes and Exit.
❏
If you have made changes that you do not want applied, select
Ignore Changes and Exit.
❏
To reset to factory settings, select Set Defaults and Exit.
This option will restore the original factory system defaults.
CAUTION: Do NOT turn the computer power OFF while the ROM is
saving your F10 Computer Setup changes because the CMOS could
become corrupted. It is only safe to turn off power to the computer after
you exit the F10 Setup screen.
www.hp.com
Computer Setup (F10) Utility Guide
F10
key at the appropriate time and the
again to access the utility.
Enter
key. To return to the Computer
Esc
key.
Enter
key.
3