Network Service Boot; System Ids - HP Point of Sale rp5000 Setup Manual

Computer Setup (Continued)
Heading
Security
(continued)
✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
Computer Setup (F10) Utility Guide
Option

Network Service Boot

System IDs

www.hp.com
Computer Setup (F10) Utility Guide
Description
Enables/disables the computer's ability to
boot from an operating system installed on
a network server. (Feature available on NIC
models only; the network controller must reside
on the PCI bus or be embedded on the system
board.)
Allows you to set:
• Asset Tag (16-byte identifier) and
Ownership Tag (80-byte identifier
displayed during POST).
See the Desktop Management Guide for more
information.
• Chassis serial number or Universal Unique
Identifier (UUID) number if the current
number is invalid. (These ID numbers are
normally set in the factory and are used to
uniquely identify the system.)
• Keyboard locale setting (for example,
English or German) for System ID entry.
11