Power Cord Set Requirements - HP Point of Sale rp5000 Safety And Regulatory Information Manual

Safety & regulatory information
Hide thumbs Also See for Point of Sale rp5000:
Table of Contents



Power Cord Set Requirements

The power supply for the computer has a power switch. This feature
allows the computer to be operated on an input voltage of 100–200V
or 200–400V.
The power cord set (flexible cord or wall plug) received with this
product meets the requirements for use in the country where you
purchased the equipment.
If you need to obtain a power cord for a different country, you should
purchase a power cord that is approved for use in that country.
The power cord must be rated for the product and for the voltage and
current marked on the product's electrical ratings label. The voltage
and current rating of the cord should be greater than the voltage and
current rating marked on the product. In addition, the diameter of the
wire must be a minimum of 0.75 mm
or 18AWG, and the length of
the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you
have questions about the type of power cord to use, contact the HP
authorized service provider.
A power cord should be routed so that it is not likely to be walked on
or pinched by items placed upon it or against it. Particular attention
should be paid to the plug, electrical outlet, and the point where the
cord exits from the product.
Safety & Regulatory Information


Table of Contents

Table of Contents