Kramer KRT-4 Quick Start Manual

Scan for full manual
Step 1: Check what's in the box
KRT-4 Cable Retractor
Step 2: Get to know your KRT-4
# Feature
1 Retractor Enclosure
2 Fixed Cable Female Connector
3 Fixed Cable End
4 Screw Openings for Mounting Under
the Table (3)
5 Wing-Head Thumb Screw
6 TBUS Installation Slot
7 Retracting Cable
8 Retracting Cable Male Connector
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Step 3: Mount KRT-4
Use this procedure to mount
and TBUS-10XL and so on.
•
Before mounting the KRT-4
power sockets) and mount the TBUS onto a table.
•
Remember to prepare an opening in the TBUS inner frame
for the retracting cable connector (for example, use the
Kramer WCP pass-through insert).
KRT-4 Quick Start
KRT-4 Quick Start Guide
This guide helps you install and use your
Go to www.kramerav.com/downloads/KRT-4
upgrades are available.
3 M4x50 screws
Function
Contains the retractable cable mechanism.
Connect to a male connector under the table.
Short connector cable.
Use to attach the
Use to turn and lock
Insert TBUS enclosure side into the slot to attach
Pull to connect to a connector above the table.
Connect to a female connector.
KRT-4 onto the following Kramer TBUS units: TBUS-1AXL, TBUS-3xl, TBUS-4xl, TBUS-5xl, TBUS-6xl
onto a TBUS, you need to configure and install the TBUS inner frame (including inserts and
KRT-4 for the first time.
to download the latest user manual and check if firmware
WCP (KRT) insert kit
KRT-4
HDMI™, USB-C, VGA, audio (3.5mm),
LAN, USB-3.0, MDP/H (up to 4K30Hz),
3H2 (HDMI extender) and DisplayPort.
Refer to
4 for the updated configuration list.
KRT-4 directly under a table.
KRT-4 to the TBUS enclosure.
• Ensure that the environment (e.g., maximum ambient temperature
& air flow) is compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should
be used for avoiding overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be
maintained.
P/N: 2 9 0 0 - 3 0 1 4 7 0 QS
1 Quick start guide
is available for the following cables:
www.kramerav.com/product/KRT-
KRT-4 to a TBUS.
Rev: 4