Technical Specifications Figures Figure 1: WP-211DS Front Panel Figure 2: WP-211DS Rear Panel Figure 3: Example of a Conference Room WP-211DS Installation Figure 4: CAT5 PINOUT Figure 5: Example of a WP-211DS Installation Figure 6: Remote Terminal Block Connector Tables...
Page 3
1 For example: model number AD2512C, part number 2535-000251 – No operator-serviceable parts inside unit. – Use only the Kramer Electronics input power – Disconnect power and unplug unit from wall 2900-9999992...
2 Each wall plate is supplied with the required M3x4 screws 3 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com Introduction , which are clearly defined...
Belgium, one for Germany, one for England (and the rest of Europe), and one for the USA— is a high performance 2x1 automatic switcher for computer graphics and stereo audio signals. The WP-211DS detects the presence of the active XGA-type input signal from either IN 1 (the default) or IN 2, and automatically routes it to the acceptor connected to the rear panel XGA OUT and the AUDIO OUT connectors.
Avoiding interference from neighboring electrical appliances that may adversely influence signal quality, and positioning your WP-211DS away from moisture, excessive sunlight and dust Your WP-211DS Figure 1 and Table 1 define the front panel of the WP-211DS: Your WP-211DS Figure 1: WP-211DS Front Panel...
AUDIO IN 1 mini plug Connector Red LED Button 10 POWER LED 11 LOOP HD15F Connector Figure 2 and Table 2 define the rear panel of the WP-211DS: Table 2: WP-211DS Rear Panel Features Feature 12 POWER SUPPLY Terminal Block Connector...
Select the default master source signal, see section 5.4 Connect the REMOTE connector, see section 5.5 You can use your WP-211DS, for example, in a conference room, as the example in Figure 3 illustrates: Figure 3: Example of a Conference Room WP-211DS Installation 5.1 Installing the WP-211DS...
5.2 Wiring the CAT5 LINE IN / LINE OUT RJ-45 Connectors Table 3 and Figure 4 define the UTP CAT5 PINOUT, using pin to pin wiring to connect the WP-211DS output to the TP-120 input: Table 3: CAT5 PINOUT TP-120 CAT5...
Figure 5: Example of a WP-211DS Installation 1 XGA HD15M +Audio jack to XGA HD15M +Audio jack (not supplied). The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com. Alternatively, you can connect an XGA source to the XGA INPUT HD15F...
Similarly, if the WP-211DS detects no signal at all (when IN 2 is selected as the default), it will still route XGA INPUT 1 and AUDIO IN 1 to the XGA OUT and AUDIO...
XGA INPUT 1 (displaying a blank screen) by attaching PIN 2 to the Ground. 1 Note that the connection should be permanent, since the WP-211DS will revert to an automatic switcher when the connection is removed Using the WP-211DS .
USA: 16.2cm x 11.4cm x 3.9cm (6.4" x 4.5" x 1.55"), W, H, D WEIGHT: 0.3 kg (0.67 lbs.) approx 1 Specifications are subject to change without notice Technical Specifications of the WP-211DS AUDIO: 4dBm AUDIO: 20kHz AUDIO: 80dB AUDIO: DC...
Page 14
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 15
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the WP-211DS and is the answer not in the manual?
Questions and answers