Accessories; Troubleshooting - Craftsman 21829 - Professional 10 in. Portable Table Saw Operator's Manual

Look forthese
accessories at Sears rata'd:
Item No. 9-22212
4070331
Item No. 9-22214
Item No. 9-22215
Item No. 9-22217
Item No. 9-22220
Zero Clearance Throat Plate
Dado Throat Plate
Micro-Position Rip-Fence Accessory
Quick Fold Table
Long Miter/Rip Fence
Miter Clamp Kit
A
41& WARNING; To avoid risk of injury,use recommended
dado and zero clearance throat plata when amp}eying
a dado accessory.
I ONLY USE 6 IN. STACK DADOES.
',= NEVER BEVEL DAJDO.
• NEVER USE ADJUSTABLE DADOES ON THIS SAW,
PROBLEM CAUSE SOLUTION ]
Excess vibration. Blade is out of balance, Replace blade.
Blade is damaged. Replace blade.
Saw is not mounted securely. Tightenall hardware.
Work surface is uneven. Repositionon flat surface.
Rip fence does not move
smoothly.
Rip fence does not lock at
rear.
Adjust legs of op_onsl stand.
Check Saw Blade Inst_la_on. Replace blade
if necessary
Remount therip fence.
Clean and wax mils.
Adjustclamp screw counterclockwise,
Adiustclamps_ew clockwise.
Cutting binds or burns work,
Bladeis warped.
Rip fence not mounted c, o n'e_tLy.
Rails are dirtyor sticky.
Clamp screw isout of adjustment.
Clamp screw isout of adjustment.
Blade is dull.
Blade is heeling.
Work is fed too fast
Rip fence ismisaUgned.
Riving knife is misaligced.
Wood iswarped.
Replace or sharpen blade,
Align miter base.
Slow the feed rats.
Align the _lpfence.
Adiust the dvlng knife with shims provided.
Replacethe wood. Always cut with convex
side to table surface.
46