Maintenance; Accessories - Craftsman 315.CRS1000 Operator's Manual

WARNING:
When servicing, use only identical
Craftsman replacement parts. Use of any other part
may create a hazard or cause product damage.
WARNING:
Always wear eye protection with side
shields marked to comply with ANSI Z87.1. Failure to
do so could result in objects being thrown into your
eyes resulting in possible serious injury.
WARNING:
To avoid serious personal injury, always
remove the battery pack from the tool when cleaning
or performing any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
Look for these accessories at Sears retail:
BLADE TYPES
For fast smooth cuts in woods, masonite, plastics, hard composition board and all
plunge cutting. Keyhole blade shape permits cutting in hard to reach areas. ..................................... 6 .................... 6
For fast, smooth, deep cuts through thick wood, plastic, composition board, and hardboard. .......... 12 ................... 6
For rough cuts in wood. ....................................................................................................................... 12 ................... 6
High speed steel blade for cutting ferrous metals less than 1/8 in. thick and for cutting
tubing or pipe with a 1/8 in. thick wall section or less. ........................................................................ 4 ................... 24
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any
attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or acces-
sories not recommended can result in serious personal injury.

MAINTENANCE

WARNING:
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts.
Chemicals can damage, weaken or destroy plastic
which may result in serious personal injury.
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts
should be replaced at a Sears Service Center.
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
WARNING:
terminals with heavy-duty adhesive tape. Do not
attempt to destroy or disassemble battery pack
or remove any of its components. Lithium-ion and
nickel-cadmium batteries must be recycled or dis-
posed of properly. Also, never touch both terminals
with metal objects and/or body parts as short circuit
may result. Keep away from children. Failure to
comply with these warnings could result in fire and/
or serious injury.

ACCESSORIES

10 – English
Do not at any time let brake fluids,
Upon removal, cover the battery pack's
LENGTH
IN.
TEETH
PER IN.