Safety Guidelines; Server Precautions - Intel SC5100 - Server Chassis Rack Optimized Hot Swap Redundant Pwr Installation Manual

Safety Guidelines

Before you remove a server cover, observe these safety guidelines:
•
Only technically qualified personnel should integrate the server.
•
Turn off all peripheral devices connected to the server.
•
Turn off the server using the push-button on/off power switch on the front panel of the server,
and unplug the AC power cord from the power supply or wall outlet.
•
Label and disconnect all peripheral cables attached to the I/O panel on the back of the server.
•
Provide some electrostatic discharge (ESD) protection by wearing an antistatic wrist strap
attached to chassis ground of the server—any unpainted metal surface—when handling
components.

Server Precautions

WARNINGS
S
ERVER POWER ON
front panel of the server does not turn off the AC power. To remove AC
power from the server, you must unplug the AC power cord from either
the power supply or wall outlet.
H
AZARDOUS CONDITIONS
current, and energy levels are present inside the power supply enclosure.
There are no user-serviceable parts inside it; servicing should only be
done by technically qualified personnel.
H
AZARDOUS CONDITIONS
conditions may be present on power, telephone, and communication
cables. Turn off the server and disconnect telecommunications systems,
networks, modems, and the power cord attached to the server before
opening it. Otherwise, personal injury or equipment damage can result.
A
VOID INJURY
use only a mechanical assist unit to lift it off the shipping pallet.
Use only a hand-truck or other mechanical assist unit to move the server
from one location to another.
/ : The push-button on/off power switch on the
OFF
—
POWER SUPPLY
—
DEVICES AND CABLES
: To avoid personal injury when unpacking the server,
: Hazardous voltage,
: Hazardous electrical
5