Install Top Cover; Installing The Top Cover - Intel SC5100 - Server Chassis Rack Optimized Hot Swap Redundant Pwr Installation Manual
Rack kit
Hide thumbs
Also See for SC5100 - Server Chassis Rack Optimized Hot Swap Redundant Pwr:
- Parts list (8 pages) ,
- Product manual (20 pages)
Table of Contents
Advertisement
Install Top Cover
The Rack Kit contains two unpainted top covers. The SC5100 server chassis and the SC5200 Base
server chassis use the top cover without a fan access door. The SC5200 HSRP server chassis uses
the top cover with a fan access door.
1. Place the cover so the tabs go into the slots on the server. The cover should be flush against the
chassis.
2. Slid the cover forward until it stops.
3. Tighten the two captive screws into the rear of the chassis.
Rack Installation Procedures
Figure 18. Installing the Top Cover
OM11928
29
Advertisement
Table of Contents
Need help?
Do you have a question about the SC5100 - Server Chassis Rack Optimized Hot Swap Redundant Pwr and is the answer not in the manual?
Questions and answers