Remove Top Cover; Removing The Cover - Intel SC5100 - Server Chassis Rack Optimized Hot Swap Redundant Pwr Installation Manual

Remove Top Cover

1. Loosen the two thumbscrews that attach the top cover to the chassis.
2. Slide the cover backward a short distance, until it stops.
3. Pull the entire cover outward, straight away from the chassis, to disengage the rows of tabs
from the notches in the top and bottom edges of the chassis. Set the cover aside.
Rack Installation Procedures
* Some chassis details shown may different in your chassis.
Figure 2. Removing the Cover
OM11929
11