Remove Door; Removing The Hinge Pins - Intel SC5100 - Server Chassis Rack Optimized Hot Swap Redundant Pwr Installation Manual

Remove Door

1. Move the chassis so the door hangs over the edge of your workbench.
2. Open the door.
3. Press the plastic clip in towards the chassis.
4. Pull the hinge pin out with one hand while supporting the door with the other.
5. Slide the door to the left to remove it from the other hinge pin.
6. Remove the hinge pins and save for future use.
14
A. Plastic clip
B. Hinge pin
Figure 5. Removing the Hinge Pins
Intel SC5100 and SC5200 Rack Kit Installation Guide
A B
OM13729