Remove The Plastic Or Epac System Fan Holder; Remove The Right Side Cover - Intel SC5100 - Server Chassis Rack Optimized Hot Swap Redundant Pwr Installation Manual
Rack kit
Hide thumbs
Also See for SC5100 - Server Chassis Rack Optimized Hot Swap Redundant Pwr:
- Parts list (8 pages) ,
- Product manual (20 pages)
Table of Contents
Advertisement
Remove the Plastic or Epac System Fan Holder
•
For the SC5100 Chassis and the SC5200 Base Chassis: Remove the epac holding the
system fans.
•
For the SC5200 HSRP Chassis:
1. Remove the plastic fan holder by removing the 3 retention screws that connect it to the
baseplate.
Remove the Right Side Cover
1. Remove and save the screw at the rear of the chassis.
2. Pull up on the black clip.
3. Remove and save the black clip.
4. Slide the cover backwards and remove it.
Rack Installation Procedures
19
Advertisement
Table of Contents
Need help?
Do you have a question about the SC5100 - Server Chassis Rack Optimized Hot Swap Redundant Pwr and is the answer not in the manual?
Questions and answers