Advertisement
Quick Links
Fountain Components
Image
Item Description
Williamsburg
Chiswell
Fountain -
Water Feature
Williamsburg
Chiswell
Fountain -
Pump Cover
Williamsburg
Chiswell
Fountain -
Pump Cover
Door
Williamsburg
Chiswell
Fountain - Urn
Williamsburg
Chiswell
Fountain -
Pedestal
FT-282 Williamsburg Chiswell Fountain
Fountain Information:
• Two people are recommended for the installation of this fountain!
• This fountain holds approximately 5 gallons of water.
• This fountain uses a small fountain cover: FTNCOV-SM
• Compatible with #10 Refill Device and LED kit
• A special stopper is required to use the refill kit for this fountain
Pump Information:
OEMPF140 - 140 GPH Pump (6 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-282A
1
FT-282B
1
FT-282C
1
FT-282D
1
FT-282E
1
Assembly Instructions
Pump Kit Parts List
Image
PK140 Pump
(use only large adapter)
#10 Stopper
Approx. 12" length of 1/2" black
non-kink tubing
Approx. 2" length of 5/8" clear tubing
Hose Clamps
Proudly
MADE IN USA
Component
Quantity
Wedges
rev 4/6/2020
1
1
1
1
3
1
Advertisement
Related Manuals for YARDART FT-282
Summary of Contents for YARDART FT-282
- Page 1 FT-282 Williamsburg Chiswell Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 5 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • Compatible with #10 Refill Device and LED kit •...
- Page 2 FT-282 Williamsburg Chiswell Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
- Page 3 FT-282 Williamsburg Chiswell Fountain Assembly Instructions Step 7 - Connect the 5/8" clear tubing to the copper pipe protruding from the bottom of the finial (FT-282A). Step 8 - Center the finial (FT-282A) on the pump cover (FT-282B). FT-282A (15 lbs) 6.5"W x 10.25"H...
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.
Need help?
Do you have a question about the FT-282 and is the answer not in the manual?
Questions and answers