Advertisement
Quick Links
uniquegardendecor.com
(866) 382-8600
FT-165B
9"L x 5.5"W x 5.5"H
6 lbs
NOTE: Component drawings are not to scale
PK300 (1)
#10 compression stopper (1)
Approx. 10" length of 5/8" Black non-kink tubing (1)
4mm Allen wrench (1)
Hose clamps (3) Note – Hose clamps can be used as
flow restrictor
FT-218 St. Aubin Wall Fountain
COMPONENTS AND PARTS LIST
Pump Kit Parts List
(2 pieces)
FT-218A
40"L x 22"W x 41"H
737 lbs
Fountain holds approximately 25
gallons of water
Tools you will need
Level
4mm Allen wrench (included)
This fountain uses cover
Revised June 25, 2012
FTNCOV-MED
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for YARDART St. Aubin FT-218
Summary of Contents for YARDART St. Aubin FT-218
- Page 1 FT-218 St. Aubin Wall Fountain (2 pieces) Revised June 25, 2012 COMPONENTS AND PARTS LIST uniquegardendecor.com (866) 382-8600 FT-218A 40”L x 22”W x 41”H 737 lbs FT-165B 9”L x 5.5”W x 5.5”H 6 lbs NOTE: Component drawings are not to scale Fountain holds approximately 25 gallons of water Pump Kit Parts List...
- Page 2 FT-218 St. Aubin Wall Fountain (2 pieces) Revised June 25, 2012 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface that is capable of holding a minimum of 950 pounds within a 6 square foot area. 2.
Need help?
Do you have a question about the St. Aubin FT-218 and is the answer not in the manual?
Questions and answers